The machine adopts ISO international code. Keyboard manual data input, it is also provided with program of power cut off protection and the functions of automatic disgnosis, and with RS232 interface.
Longitudinal and cross feeds are effected by ball leadscrews.
Either vertical and horizontal 4-station or 6 -station tool post or gang tools can be selected. The post is located on precision contrite gear with a high repeated positioning accuracy.
Both chuck and tailstock are supplied with hydraulic or manual type.
The surface of the bedways is supersonic frequency hardened and precision ground with a long service life.
Variable spndle speed can be programmed as two rangs, that is high one and low one.
Items
CK6150B
Max. swing over bed
ø500mm
Max. swing over carriage
ø310mm
Width of bed
405mm
Max. work-piece length
750/100/1500/2000/3000mm
Max. turning length
650/900/1400/1900/2900mm
Max. swing in gap
Length of gap
230mm
Spindle bore
ø80mm
Cone hole diameter and taper of spindle hole
MT.NO.7
Steps of spindle speed(manual)
Variable
Rang of spindle speed
400-1600 rpm (high)
50-400 rpm (low)
Rapid feed for axis Z
10m/min
Rapid feed for axis X
8m/min
Max .travel of axis Z
720/970/1270/1970/2970mm
Max, travel of axis X
300mm
Min. input
0.001mm
Tool post stations
4-ways or 6-ways
Tool cross section
32*32mm
External diameter
ø75mm
Taper of bore
MT.NO.5
Max. traverse
150mm
X/Z motor torque
7.5/10Nm(750~2000) 7.5/22Nm(3000)
Power of main motor
7.5KW
Power of cooling pump
90W
Net weight
2700/3000/3500/4000/4600kg
Company :
PROMACH MACHINERY SDN BHD
Tel :
+607 352 8355 / +607 352 9355
Fax :
+607 3525355
Address :
No. 45, Jalan Mutiara Emas 5/16, Taman Mount Austin, 81100 Johor Bahru, Malaysia.